|
 W.S. Tyler offers the T-CLASS vibrating screen with field proven features that make it a versatile performer.
It is designed to be a rugged dependable vibrating screen for use in the screening of a wide variety of materials commonly found in the crushed stone, sand and gravel, limestone, chemical, fertilizer, phosphate, gold, coal, and other mining industries.
The T-CLASS two bearing, circle throw vibrating screen is easy to maintain because of its readily replaceable parts and solid HUCK™ bolted construction. For maximum versatility, the T-CLASS model offers one, two or three screen decks. These decks are available in widths from three feet to eight feet and in lengths up to twenty-four feet. |
|
 The circle throw motion of the T-CLASS Series is developed by a counterbalanced shaft assembly, which is supported by two double spherical roller screen bearings. The circle throw action has proven to be very effective in moving coarse material to the top of the bed so that the fines and near mesh particles may pass through the media openings.
The T-CLASS Series vibrating screen is usually installed at an angle of 15 to 25 degrees and op-erates at speeds of 750 to 1050 RPM. The T-CLASS Series is designed to provide separations in the 12 inch to 1/8 inch particle size range.
The T-CLASS Series provides fast, accurate sizing of such materials as sand, gravel, coal, metallic ores, slag, bauxite, phosphate rock and many more.
|
|
 The T-CLASS Series modular design and the use of standard components result in savings because W.S. Tyler fabricates and assembles several different size machines from standard stock compo-nents. This standardization of components also results in readily available spare parts.
Efficient operation, low production cost, and low maintenance are assured by T-CLASS rugged construction and larger bearings. The bearings used by T-CLASS Series match the bearings used in our other vibrating screen series.
T-CLASS simple design combined with its rugged construction results in minimum maintenance and downtime. |
|
| Every T-CLASS Series vibrating machine is backed by Tyler’s 125 years of engineering experience. Prior to shipment, each machine is carefully examined and operated over a prolonged period assuring correct balance, satisfactory bearing operating temperatures, smooth operation, acceptable noise levels and quality workmanship. |
|
 Positive 3-bend tension rails. Rubber covered steel bar rails |
|
|
Alloy steel counterweight shaft ground to precision tolerances.
Heavy-duty self-aligning spherical roller screen bearings with inner races fitted to the shaft and outer races mounted in the cast ductile iron bearing housing.
“Loose-on-the-shaft” bearings provide easy installation, replacement, and equal load distribution.
Labyrinth seals prevent grit or foreign matter from reaching the bearings.
Steel counterweighted wheels with adjustable weights for proper balancing.
Seamless steel tube shaft casing with cast iron tube heads to assure proper bearing alignment.
HUCK™-Bolted Screen Body design for extra strength and rigidity under all working conditions.
Stover nuts used in shaft assembly and screen section tensioning for strong safe connections and easy maintenance.
Unique design angle box tension system
3-bend tension rails to engage the hooked edges of the screen sections.
Shaft driven from either end.
Grease lubrication standard for low maintenance.
Screen support frames are supplied with replaceable rubber buffer strips which contribute to screen life.
Cambered deck construction permitting proper screen tensioning.
Adjustable spring mounting assemblies
|
|
 Optional one-piece stress-relieved support
panel with universal cambered deck system |
|
 Optional universal flat-deck system for modular panels |
|
 TYCAN standard nested spring mounts |
Angle box with stover nuts for proper and secure media tensioning
|
|
Base frame assemblies
Vibrating or non-vibrating dust enclosure assemblies
Nema ‘B’ normal torque motors
Heavy-duty motor slide bases
Drive guards
Step washing troughs
Differential angle deck assemblies
Ball tray decks for screen cleaning
Spray pipe holes
Non-vibrating spray systems
Wedge tension assemblies
Rubber curtains at feed end between decks
Fines collection hoppers
Ty-Dura rubber torque tube covers
Side plate liners, ARS or Tyrethane
Extra heavy-duty screen frame assemblies
Heavy special grade structural steel sideplates for additional strength and rigidity.
Discharge lip liners, ARS or Tyrethane
Deck frame assemblies prepared to accept:
Cast double tapered grizzly sections
Perforated plates
Rubber screen sections
Rubber clad plates
End-tensioned harp-type screen sections
A variety of modular urethane deckings
|
|
MATERIAL WEIGHT LUMP SIZE
50 #/cu.ft.............................................................12 in.
100 #/cu.ft.............................................................10 in.
140 #/cu.ft...............................................................8 in.
Max. material temperature....................................250 °F
Max. material drop to deck.....................................30 in.
STANDARD SPEEDS STANDARD THROW
750 RPM.............................................................1/2 in. circle
860 RPM............................................................3/8 in. circle
1050 RPM.............................................................1/4 in. Circle |
|
